Byla uvedena aktualizace Inventoru HSM (Ultimate) 2018 - HSM 2018.1 (R2). Ke stažení je ve vašem účtu Autodesk Account (viz Download).

Přehled novinek:

Improved turning toolpath preview for ID operations. Toolpath is now shown through the model, and the stock area preview is shown without edges. #6423

Added parametric confinement for turning, and removed the old confinement. #2894

Added retract height to Profiling and Grooving. #7290

Added retract height to turning Face, Part, Single Groove and Chamfer. #7291

Added support for embedding pictures in Setup Sheet.

Added relevant turning tool information in Setup Sheet.

Added support for turning tool preview in Setup Sheet. #2501

Added retract height for turning threading. Removed inner and outer radius as they did not affect the generated toolpaths. #4042

IdeaStation: Support ability for user to choose which license level (Premium/Ultimate) to use. #7412

Added dwell option for the Single Groove opration #7451

Allow user to disable toolpath generation on creation/change of an operation. This option can be changed in Inventor HSM options. #6422

IdeaStation: Use program name/comment from setup if only operation(s) selected. #7138

Fixed wrong stock simulation issue when milling comes after a Turning Thread operation. #7582

Simple ordering functionality for Parallel operation is now obeying the setting. #7593

Ensure that vertical moves for 2D Contour are generated with Plunge feed. #7512

Prevent unnecessary invalidation of operations using rest machining from tool (instead of operations) when re-ordering operations. #7458

Fix misspelling in Preserve Order tooltip. #7517

Prevent overwriting of all tool parameters just by re-selecting the same tool (with no changes). #7450

The Leads on all Finishing Passes parameter in 2D Contour / 2D Pocket is now being obeyed. #1366

Fixed wrong start position for bore milling cycle when using conventional milling direction. #7496

Avoid text truncation on Product Information button. #7026

When copying a pattern containing a drill operation from one document to another, Fusion would crash when attempting to fix the missing selections in the pasted pattern/operations. #7506

Custom value specified as size of a turning insert is now being persisted #7443

Calculating proper compensation point when selecting ‘Tip tangent’ for inserts without holder. #6742

Fix scenario in Inventor 2018 where CAM-specific marking menu would not be shown in simulate command if CAM browser is not active. #7383