CAD Forum discussion (EN) : Hatch Creation Help

Hatch Creation Help : You can make your own, at whatever...

Fri, 22 Dec 2017 15:41:55 +0000

Author: Kent Cooper
Subject: 12568
Posted: 22.Dec.2017 at 15:41

You can make your own, at whatever sizes and/or proportions and/or angles you want. Read about it in Help [>>here<< for 2018, but no different for earlier versions], draw up your specifics in a limited area, and use the image for what values to put where in the pattern definitions.

Edited by Kent Cooper - 22.Dec.2017 at 15:45

Hatch Creation Help : Pefect!! that's awesome....

Fri, 22 Dec 2017 09:15:44 +0000

Author: martingtc
Subject: 12568
Posted: 22.Dec.2017 at 09:15

Pefect!! that's awesome. I have another which is the same, but 100 across and 170 top to bottom. Which valus would I change on the txt file?

Thank you

Edit: actually, it's a bit off - the bars are 20 when they need to be 32 :(

Edited by martingtc - 22.Dec.2017 at 11:38

Hatch Creation Help : I happen to have one quite similar...

Thu, 21 Dec 2017 20:37:43 +0000

Author: Kent Cooper
Subject: 12568
Posted: 21.Dec.2017 at 20:37

I happen to have one quite similar to that:

*LATT60,LATTICE-WORK AT 60 DEGREES, 1" SLATS, 3" GAPS
60,0,0,0,4
60,1.1547,0,0,4
120,0,0,2.3094,4,3.4641,-1.1547
120,1.1547,0,2.3094,4,-1.1547,3.4641

Are you capable of figuring out how to alter that for your size and proportions?

Also, you will need to decide whether the 70x120 diamond dimensions are the critical thing, or an actual 60-degree angle is wanted [yours is only about 1/4 of a degree off of 60]. If the former, the angle designators above will have to be changed as well as the offsets and pen-down/pen-up numbers. If the latter, the angles above are good.

Hatch Creation Help : So you want someone here to create...

Thu, 21 Dec 2017 18:07:50 +0000

Author: John Connor
Subject: 12568
Posted: 21.Dec.2017 at 18:07

So you want someone here to create a custom hatch pattern. What are you willing to pay?

Edited by John Connor - 21.Dec.2017 at 18:21

Hatch Creation Help : Sorry, that's how I want...

Thu, 21 Dec 2017 17:59:02 +0000

Author: martingtc
Subject: 12568
Posted: 21.Dec.2017 at 17:59

Sorry, that's how I want the hatch to look - a diamond pattern with thick bars. I've drawn the end product but need a hatch for it please

Hatch Creation Help : Can you upload a screen shot of...

Thu, 21 Dec 2017 17:13:21 +0000

Author: Breeze104
Subject: 12568
Posted: 21.Dec.2017 at 17:13

Can you upload a screen shot of what "you" are getting? Because when I opened the dwg it was total hatched.

Hatch Creation Help : Can someone please help me? I've...

Thu, 21 Dec 2017 16:52:21 +0000

Author: martingtc
Subject: 12568
Posted: 21.Dec.2017 at 16:52

Can someone please help me? I've drawn a 1m x 1m square and need the hatch inside as a .pat but I just can't work it out :( can someone help?

Super thanks.uploads/657554/dm.dwg