Thanx for picture help but dear its still not working for me. its a custom hatch as shown in the picture. Could it be the problem of custom hatch? 

You must have Hatch properties not selected in your MATCHPROP Settings.  Start MATCHPROP, pick the source Hatch pattern, choose the Settings option, and I suspect you will see this in regard to the highlighted piece:

The piece of Hatching visible to the left has its origin in the middle [you can see the greenish UCS icon], and the one visible to the right has its origin at 5000,5000, so it's distorted similar to your original image.

When I MATCHPROP with this Special Property un-checked, as shown, I get what you describe [the target Hatch only gets the basic properties like Layer, color, etc. matched], but if I check that button at Hatch in Special Properties, then it works as you intend [properties specific to Hatch patterns, such as origin and scale, are also matched].

In some cases when hatching isn't working easily and for some repetive hatching I would make a "bank" of hatches with 3, 4, 5, 6, etc... grips to copy, re-grip, stretch.

And what I said about making a good hatch at the very first try otherwise the MATCHPROP won't work fine I experienced it years before today.

When I do a first hatch on a file, if it's not OK for me ( mainly scale and angle ) I erase it and do the settings for it to be OK directly AND NOT MODIFIED WITH THE PROPERTIES PANNEL ( Ctrl+1 ) until i's good.

Not necessarily at a corner, but yes, if the patterns should "sit" in the same relationship to the rectangular outline of each, then each one's origin should be at the same place in relation to its rectangle [a corner, the middle, whatever puts the "graining" part of interest where they want it].