AIA/National Std. Layers
Printed From: CAD Forum
Category: EN
Forum Name: CAD - general
Forum Description: General discussion about CAD, formats, standards, management, licensing, networking, harware, other CAD applications
URL: https://www.cadforum.cz/forum_en/forum_posts.asp?TID=10049
Printed Date: 30.Sep.2026 at 16:30
Topic: AIA/National Std. Layers
Posted By: logicaldude
Subject: AIA/National Std. Layers
Date Posted: 14.Feb.2014 at 04:54
I would like to find a block that would insert all the layers needed per:
US National Cad Standard or
AIA Layering Standard or
Public Works & Government Services Canada Drafting standard
Creating all the layers required for Fire suppression, HVAC and Plumbing for one's own use would require a lot of time. Would greatly appreciate any help. Thank you.
|
Replies:
Posted By: John Connor
Date Posted: 14.Feb.2014 at 09:57
Does the AIA make a standard template available with all the layers already included? You might want to check. Otherwise the only two options would be 1) find someone (an architect?) who follows that standard and ask if they would be kind enough to share a template or 2) get started on creating one yourself (a tedious and thankless job).
-------------
"Humans have a strength that cannot be measured. This is John Connor. If you are reading this, you are the resistance."
<<AutoCAD 2015>>
|
Posted By: logicaldude
Date Posted: 14.Feb.2014 at 14:41
Thank you John. I might try to create layers for just the disciplines I work in.
|
Posted By: John Connor
Date Posted: 14.Feb.2014 at 14:50
I'd share a template with you if I had one but the two architects I work with follow their own standards when it comes to layering. Good luck.
-------------
"Humans have a strength that cannot be measured. This is John Connor. If you are reading this, you are the resistance."
<<AutoCAD 2015>>
|
|