Print Page | Close Window

introducing autocad gps points

Printed From: CAD Forum
Category: EN
Forum Name: AutoCAD
Forum Description: Discussion about AutoCAD and AutoCAD LT, viewers, DWG and DWF formats, Design Review, AutoCAD 360, add-ons
URL: https://www.cadforum.cz/forum_en/forum_posts.asp?TID=10173
Printed Date: 31.May.2026 at 23:17


Topic: introducing autocad gps points
Posted By: jmontesmx
Subject: introducing autocad gps points
Date Posted: 26.Mar.2014 at 20:05

How can I enter  gps points if they enter  in 2 different quadrants in my case are 12R and 13R.

I will appreciate all your help. 


Replies:
Posted By: John Connor
Date Posted: 26.Mar.2014 at 22:24
What program are you using?


-------------
"Humans have a strength that cannot be measured. This is John Connor. If you are reading this, you are the resistance."

<<AutoCAD 2015>>

Posted By: jmontesmx
Date Posted: 26.Mar.2014 at 23:00
I'm not using a program especially when entry points do using UTM coordinates, had not had problems because they always entered data from the 13R quadrant, but today I had to enter data from both the 12R quadrant as the 13R points 12R are placed very far distances from where they should be, I think should change the coordinate origin in the drawing and I did but I must be doing something wrong or I'm not putting well the new origin.

Posted By: John Connor
Date Posted: 27.Mar.2014 at 10:49
I meant are you trying to do this is plain AutoCAD or some other program like Civil 3D?


-------------
"Humans have a strength that cannot be measured. This is John Connor. If you are reading this, you are the resistance."

<<AutoCAD 2015>>


Print Page | Close Window