Print Page | Close Window

pick solids behind a solid?

Printed From: CAD Forum
Category: EN
Forum Name: Civil 3D, Map, InfraWorks
Forum Description: Discussion about mapping and GIS applications Map, Civil3D, InfraWorks, MapGuide and Raster Design
URL: https://www.cadforum.cz/forum_en/forum_posts.asp?TID=10342
Printed Date: 13.May.2026 at 05:21


Topic: pick solids behind a solid?
Posted By: joestmann
Subject: pick solids behind a solid?
Date Posted: 29.May.2014 at 16:34
What setting allows you to pick a solid behind another solid?


Replies:
Posted By: John Connor
Date Posted: 29.May.2014 at 17:26
Try CULLINGOBJ.


-------------
"Humans have a strength that cannot be measured. This is John Connor. If you are reading this, you are the resistance."

<<AutoCAD 2015>>

Posted By: Kent Cooper
Date Posted: 30.May.2014 at 15:07

If you can put the Pickbox at a place at which either [or any of more than two] object(s) can be selected, hold down the Control key and pick repeatedly, and it will cycle through all objects selectable at that location.  When you see the one you want highlighted, hit Enter/space and it will be selected.


Print Page | Close Window