Print Page | Close Window

how do you make model text fit around a circular

Printed From: CAD Forum
Category: EN
Forum Name: Revit
Forum Description: Discussion about the BIM application Autodesk Revit (Architecture, Structure, MEP)
URL: https://www.cadforum.cz/forum_en/forum_posts.asp?TID=10804
Printed Date: 05.May.2026 at 15:09


Topic: how do you make model text fit around a circular
Posted By: Tryvon
Subject: how do you make model text fit around a circular
Date Posted: 27.Nov.2014 at 12:56
how do i make my model text fit around a circular surface

-------------
i'm an architect and a 3d graphics designer..Always ready to work, freeminded,and always ready to share ideas.


Replies:
Posted By: Vladimir Michl
Date Posted: 28.Nov.2014 at 13:51
In AutoCAD e.g. this way:
http://www.cadforum.cz/cadforum_en/how-to-project-geometry-to-any-3d-surface-tip7297" rel="nofollow - http://www.cadforum.cz/cadforum_en/how-to-project-geometry-to-any-3d-surface-tip7297
 
In Revit you will need to make a face-based family and place the text letter by letter.


-------------
Vladimir Michl (moderator)
ARKANCE - https://arkance.world" rel="nofollow - https://arkance.world - Autodesk Platinum Partner

Posted By: Tryvon
Date Posted: 29.Nov.2014 at 21:49
Vladimir Michl....thanks alot..you are the best

-------------
i'm an architect and a 3d graphics designer..Always ready to work, freeminded,and always ready to share ideas.


Print Page | Close Window