stp to rfa
Printed From: CAD Forum
Category: EN
Forum Name: Revit
Forum Description: Discussion about the BIM application Autodesk Revit (Architecture, Structure, MEP)
URL: https://www.cadforum.cz/forum_en/forum_posts.asp?TID=10887
Printed Date: 04.May.2026 at 05:44
Topic: stp to rfa
Posted By: rouxssel
Subject: stp to rfa
Date Posted: 31.Dec.2014 at 16:21
We have received an stp file from a vender. Is there a way to convert this to rfa format so that the modeled equipment can be brought into our current project in revit?
-------------
Chris T. Roussel Jr.
|
Replies:
Posted By: John Connor
Date Posted: 31.Dec.2014 at 17:09
I don't think you can directly convert from one to another.
Do you have a machine that runs AutoCAD? You could import the .stp into AutoCAD then export it out as a .sat file which can then be imported into Revit.
-------------
"Humans have a strength that cannot be measured. This is John Connor. If you are reading this, you are the resistance."
<<AutoCAD 2015>>
|
Posted By: rouxssel
Date Posted: 31.Dec.2014 at 17:35
Thanks for the feedback. But from what I've read, going through autocad to create the .sat with slow revit down. I have access to vanilla cad, but I also have inventor fusion. I should be able to do the same thing in inventor fusion correct? Open the .stp then convert it to .sat?
-------------
Chris T. Roussel Jr.
|
Posted By: John Connor
Date Posted: 31.Dec.2014 at 17:38
Yes, you can do that.
-------------
"Humans have a strength that cannot be measured. This is John Connor. If you are reading this, you are the resistance."
<<AutoCAD 2015>>
|
|