Print Page | Close Window

Replace with MVIEW-block?

Printed From: CAD Forum
Category: EN
Forum Name: Civil 3D, Map, InfraWorks
Forum Description: Discussion about mapping and GIS applications Map, Civil3D, InfraWorks, MapGuide and Raster Design
URL: https://www.cadforum.cz/forum_en/forum_posts.asp?TID=11449
Printed Date: 13.May.2026 at 17:45


Topic: Replace with MVIEW-block?
Posted By: Kerston_Mo
Subject: Replace with MVIEW-block?
Date Posted: 01.Nov.2015 at 13:15
Hi! I am looking for a LISP to replace 2D-blocks in a file (more than 1900 pcs of the same one block) with an Mview-block instead. Any ideas? 

1900 thanks in advance!


Replies:
Posted By: John Connor
Date Posted: 01.Nov.2015 at 20:21
What is a Mview block?


-------------
"Humans have a strength that cannot be measured. This is John Connor. If you are reading this, you are the resistance."

<<AutoCAD 2015>>

Posted By: edwinprakoso
Date Posted: 02.Nov.2015 at 05:30
MVIEW block is multi view block. Only available in verticals like AutoCAD MEP. Basically the block has different views, from top, front, back, left and right. So when you create elevation view or section view, the software will use show appropriate view for that particular block.

I don't use them frequently and long enough... so I don't know if that's possible. 


-------------



Edwin Prakoso

http://cad-notes.com" rel="nofollow - CAD notes | CAD tutorials and best practices


Print Page | Close Window