Print Page | Close Window

Hole Charts

Printed From: CAD Forum
Category: EN
Forum Name: CAD - general
Forum Description: General discussion about CAD, formats, standards, management, licensing, networking, harware, other CAD applications
URL: https://www.cadforum.cz/forum_en/forum_posts.asp?TID=11557
Printed Date: 16.Aug.2026 at 23:42


Topic: Hole Charts
Posted By: managuafc
Subject: Hole Charts
Date Posted: 29.Dec.2015 at 17:32
Hello everyone,
 
 I am creating a panel with 2 rows of 5 holes. When I create the hole chart for the panel, I specify the origin to be at the left bottom corner of the panel and I select my holes. The labeling of the holes on the panel start with the top right hole in the panel as "A1", this being the farthest hole from the origin. And the closest hole to the origin as "A10". Numbering the holes from right to left on each row.
 
I want to reverse that labeling to have the closest hole to the origin to be "A1" and numbering from left to right on each row. I tried to change the sorting order of the chart parameters but it doesn't change the labeling on the panel, just the ordering of the chart labels.
 
I have not being able to find the correct command to change that. I am using ANSI standards.
 
Thank you for any help you can provide. 


Replies:
Posted By: John Connor
Date Posted: 30.Dec.2015 at 11:30
What program are you doing this in?


-------------
"Humans have a strength that cannot be measured. This is John Connor. If you are reading this, you are the resistance."

<<AutoCAD 2015>>

Posted By: managuafc
Date Posted: 30.Dec.2015 at 16:09
Sorry, I forgot to mention that.
 
AutoCAD Mechanical 2016
 
Thanks

Posted By: John Connor
Date Posted: 30.Dec.2015 at 17:19
Well that is an important piece of information to have.


-------------
"Humans have a strength that cannot be measured. This is John Connor. If you are reading this, you are the resistance."

<<AutoCAD 2015>>

Posted By: managuafc
Date Posted: 21.Jun.2016 at 22:28
Now that you have that important piece of information, does anyone have an answer?


Print Page | Close Window