Print Page | Close Window

Good PC for AutoCAD to upgrade?

Printed From: CAD Forum
Category: EN
Forum Name: AutoCAD
Forum Description: Discussion about AutoCAD and AutoCAD LT, viewers, DWG and DWF formats, Design Review, AutoCAD 360, add-ons
URL: https://www.cadforum.cz/forum_en/forum_posts.asp?TID=11620
Printed Date: 20.Apr.2026 at 12:43


Topic: Good PC for AutoCAD to upgrade?
Posted By: monchhichi
Subject: Good PC for AutoCAD to upgrade?
Date Posted: 02.Feb.2016 at 04:02
My computer is running very slow, especially working on cad / sketchup drawings.

Does DELL Precision T5810 with the following components good enough for me to replace?
- Intel Xeon Processor E5-1620v3
- 16GB 2133MHz DDR4 RDIMM ECC
- 500GB 3.5inch Serial ATA (7200 Rpm) Hard Drive
- 2.5 inch 256GB SATA SSD
- Nvidia Quadro K620 2GB

Thanks.


Replies:
Posted By: John Connor
Date Posted: 02.Feb.2016 at 11:55
Seems adequate.  Are you working in 2D, 3D or both?


-------------
"Humans have a strength that cannot be measured. This is John Connor. If you are reading this, you are the resistance."

<<AutoCAD 2015>>

Posted By: monchhichi
Date Posted: 03.Feb.2016 at 05:05
Mostly 2D

Posted By: John Connor
Date Posted: 03.Feb.2016 at 11:38
It should be OK.


-------------
"Humans have a strength that cannot be measured. This is John Connor. If you are reading this, you are the resistance."

<<AutoCAD 2015>>


Print Page | Close Window