Help needed!
Printed From: CAD Forum
Category: EN
Forum Name: Inventor
Forum Description: Discussion about Autodesk Inventor
URL: https://www.cadforum.cz/forum_en/forum_posts.asp?TID=12204
Printed Date: 09.May.2026 at 22:01
Topic: Help needed!
Posted By: bavdeyka
Subject: Help needed!
Date Posted: 03.Feb.2017 at 01:18
|
Hi everyone! i need help of more experienced than myself inventor users.. How can I add material inbetween the drawing contour and surface of highlighted facets? http://www.dropbox.com/s/im5o6mb2fc1x2lp/cadproblem.png?dl=0" rel="nofollow - https://www.dropbox.com/s/im5o6mb2fc1x2lp/cadproblem.png?dl=0 http://www.dropbox.com/s/aba5cccr6olvpqw/p-eksperiment---2--shir2-shire---pu-polpu-dopfig.ipt?dl=0" rel="nofollow - https://www.dropbox.com/s/aba5cccr6olvpqw/p-eksperiment---2--shir2-shire---pu-polpu-dopfig.ipt?dl=0 I've been trying to do this for two days now to no avail  Please please help! Thank you!!! |
Replies:
Posted By: mgrenier25
Date Posted: 16.Feb.2017 at 19:06
| make another sketch on the opposite side and use a loft maybe? |
Posted By: aanonimnim
Date Posted: 25.Feb.2017 at 14:47
|
Hi, As far as I know - You can't. I will check that on Monday when I will have an access to my computer. Regards, Kris, www.cadmasters.guru |
Posted By: Nate143
Date Posted: 10.Aug.2017 at 07:36
|
Select The Geometry and use the Cut function in your modify tab I used 1 as the unit to cut the create a sketch on the surface of the cut. Project geometry of the cutout area and then create an extrusion on that sketch. then apply the material to that face. That should work :) If I may ask what it the part for? it's an interesting shape :) ------------- Regards Nate... |