Print Page | Close Window

Lane Sub assembly problem

Printed From: CAD Forum
Category: EN
Forum Name: Civil 3D, Map, InfraWorks
Forum Description: Discussion about mapping and GIS applications Map, Civil3D, InfraWorks, MapGuide and Raster Design
URL: https://www.cadforum.cz/forum_en/forum_posts.asp?TID=12952
Printed Date: 12.May.2026 at 17:21


Topic: Lane Sub assembly problem
Posted By: Humphreygze
Subject: Lane Sub assembly problem
Date Posted: 22.Sep.2018 at 11:57
We get the following error when i create corridor with this lane sub assembly in civil 3d 2019 only it works fine in civil 3d 2018. It looks like civil 3d 2019 doesn't recognize the "slope and delta x" on sub assembly composer, i have tested it on different computers all yield the same error the Top link failed to execute. Please advise

2+757.66m:  P2&L1: Failed to execute 

Offset: 0.000m
Elevation: 150.200m
Corridor: 0-20
uploads/253892/SCL_LANE_AOR.rar" rel="nofollow - uploads/253892/SCL_LANE_AOR.rar Baseline: Kimara-Kibaha CL
Horizontal Baseline: Kimara-Kibaha CL
Vertical Baseline: dp
Assembly: Assembly - (1)
Assembly Baseline:
Subassembly Group: Right (2)
Local Subassembly Name: lane_test
Global Subassembly Name: lane_test
Assembly: C:\ProgramData\Autodesk\C3D 2019\enu\Imported Tools\testo\8a6df254832143398d752ea3b1c7847e.dll
.Net Class: Subassembly.lane_test
Source: Subassembly.lane_testlane_test


-------------
Humphrey GZE
C3D 2012 SP1


Print Page | Close Window