Print Page | Close Window

Surface Elevations - Displaying a specific range

Printed From: CAD Forum
Category: EN
Forum Name: Civil 3D, Map, InfraWorks
Forum Description: Discussion about mapping and GIS applications Map, Civil3D, InfraWorks, MapGuide and Raster Design
URL: https://www.cadforum.cz/forum_en/forum_posts.asp?TID=13014
Printed Date: 14.May.2026 at 11:56


Topic: Surface Elevations - Displaying a specific range
Posted By: lmorse
Subject: Surface Elevations - Displaying a specific range
Date Posted: 04.Dec.2018 at 04:54
Hi,

I have a surface with elevations that are coloured depending on the elevation. I would like to display only elevations between a certain range e.g 210m - 230m, and not display any elevation outside of this range. I will be displaying an aerial image underneath the elevations and I want this image to show through where the elevations do not match this range.

Is anyone able to point me to the best solution please?

Thank you in advance

Lee Morse


Replies:
Posted By: c.chambers
Date Posted: 17.Mar.2019 at 23:57
Please go to

1. Surface properties
2. Analyse Tab
3. Elevation Analysis
5. Change the ranges to display the range that you want.
6. Make sure you have a style that shows elevations only.

Let me know if you have any questions. 



-------------
C. Chambers, Civil Application Specialist
---
www.infratechcivil.com


Print Page | Close Window