I would like to reproduce this PART if in 3D
Printed From: CAD Forum
Category: EN
Forum Name: AutoCAD
Forum Description: Discussion about AutoCAD and AutoCAD LT, viewers, DWG and DXF formats, Design Review, AutoCAD web, Drive, add-ons
URL: https://www.cadforum.cz/forum_en/forum_posts.asp?TID=13121
Printed Date: 03.Jul.2026 at 19:55
Topic: I would like to reproduce this PART if in 3D
Posted By: jaspion
Subject: I would like to reproduce this PART if in 3D
Date Posted: 01.Mar.2019 at 22:48
I would like to reproduce this part if in 3D I would like to know if someone can help me to reproduce this in 3D I will like to reproduce it with my 3D printer 
|
Replies:
Posted By: John Connor
Date Posted: 03.Mar.2019 at 13:56
|
Do you have a similar part that you can take measurements from or that can be scanned so you can construct a digital 3D model? ------------- "Humans have a strength that cannot be measured. This is John Connor. If you are reading this, you are the resistance." <<AutoCAD 2015>> |
Posted By: jaspion
Date Posted: 03.Mar.2019 at 17:57
| NO I'M NOT HERE IS A MAY HAVE THE PROBLEM the messure is 40 cm long and 27 cm wide |
Posted By: philippe JOSEPH
Date Posted: 04.Mar.2019 at 07:13
| The part that we can see on the photo of the quad is not measuring 40 cm x 27 cm |
Posted By: jaspion
Date Posted: 04.Mar.2019 at 08:18
| I took the measurements on the radiator that is fixed but I do not have the exact measurements |
Posted By: John Connor
Date Posted: 05.Mar.2019 at 12:08
|
It seems rather useless to me to attempt to reproduce a part in 3D if you don't have exact measurements. You would be asking for trouble. There could be conflicts with other parts and/or the mounting holes might not line up. If either would be the case then you would have to scrap what you made and start over again. Get the part 3D scanned. Don't rely on hand measuring as it would be too inaccurate. ------------- "Humans have a strength that cannot be measured. This is John Connor. If you are reading this, you are the resistance." <<AutoCAD 2015>> |
Posted By: jaspion
Date Posted: 05.Mar.2019 at 20:18
| good i will print and adjust to was and measure up to have the right measures |