PIPELINE ISOMETRIC
Printed From: CAD Forum
Category: EN
Forum Name: AutoCAD
Forum Description: Discussion about AutoCAD and AutoCAD LT, viewers, DWG and DWF formats, Design Review, AutoCAD 360, add-ons
URL: https://www.cadforum.cz/forum_en/forum_posts.asp?TID=13463
Printed Date: 16.May.2026 at 20:28
Topic: PIPELINE ISOMETRIC
Posted By: mher2018
Subject: PIPELINE ISOMETRIC
Date Posted: 09.Jul.2020 at 14:57
|
Hello all experts, i am new to pipeline drawings, we have this project a 1.2 kilometres 60"inches cross country water underground pipeline. my question is it is required to make an isometric drawings on this. or what is the necessary drawings to produce for our construction team? aside from the typical weld details & miter/ elbow bends? Help is much appreciated thank you and kept safe. mher2018
|
Replies:
Posted By: philippe JOSEPH
Date Posted: 10.Jul.2020 at 07:20
|
Hello mher2018, I don't think that it's necessary to produce an isometric drawing for your big pipeline but I would rather produce a drawing including the survey of the diffrent slopes of the pipe. Maybe inluding the theoretical and real locations of the different elbows, bends if any, accessories, etc... In that kind of project there should be X,Y,Z topo indications in a local or general system with a very well selected 0,0,0 plus X direction going east and Y direction going north. When surveying the construction it's possible to do topo measures on the external diameter of the pipe at the 3 accessible quadrants of the pipe ( left, up and right ), place this in a 3D AutoCAD file, draw the external circle passing by those 3 points and produce the exact center line of the pipe; all this in relation with the topo survey team. Hope this will help, have a nice day.
|
Posted By: John Connor
Date Posted: 10.Jul.2020 at 12:49
|
NO! An isometric drawing is NOT required. ------------- "Humans have a strength that cannot be measured. This is John Connor. If you are reading this, you are the resistance." <<AutoCAD 2015>> |
Posted By: philippe JOSEPH
Date Posted: 11.Jul.2020 at 09:50
| Hello her2018 and John, eventually se the AutoCAD file : 3D PIPES AND TOPO SURVEY.dwg in CAD/BIM Blocks. |
Posted By: John Connor
Date Posted: 11.Jul.2020 at 14:15
|
Plan and profile is typically drawn in 2D not 3D. ------------- "Humans have a strength that cannot be measured. This is John Connor. If you are reading this, you are the resistance." <<AutoCAD 2015>> |
Posted By: philippe JOSEPH
Date Posted: 11.Jul.2020 at 15:30
|
Yes John, of course but my "study" file shows "everything" usefull. I personnally use mainly 3D because of the 3D elbows to be placed along the profiles with informations to be given regarding the angles between the pipe elements and the 3D elbows to be rotated of a certain angle upstream and an other downstream, etc... If there are no 3D elbows then 2D plan and profile views are enough and you can even give the X,Y,Z coordinates of whatever you want. |
Posted By: mher2018
Date Posted: 12.Jul.2020 at 07:48
| Hello Joseph & Connor i appreciate both of your time and points, our piping sub-contractor just submitted to us as Plan & Profile (Long section sheet) in 2D indicates topographic features & bends points. I think it will work to our construction team Isometric for a long big pipeline NOT required. |
Posted By: John Connor
Date Posted: 12.Jul.2020 at 12:43
|
In all my years doing civil drafting for a municipality I was never asked to produce an isometric for a sanitary sewer or municipal water main. The only time I create an isometric was when the city I worked for wanted to build a new city hall and a plumbing isometric was required as part of the plans. ------------- "Humans have a strength that cannot be measured. This is John Connor. If you are reading this, you are the resistance." <<AutoCAD 2015>> |
Posted By: philippe JOSEPH
Date Posted: 15.Jul.2020 at 06:57
|
Hello mher2018 and John, a good topo survey will be important as the precision of the small slopes ( I supose ) are difficult to keep along big long distances. Will you have 3D bends or "just" profile and/or plan bends ? Eventually see my AutoCAD file : 3D ELBOW PIPE AND TOPO SURVEY.dwg in the CAD/BIM Blocks library here in the site.
|
Posted By: Tharwat
Date Posted: 29.Aug.2020 at 22:29
|
Hi, Currently I am working on Isometric program for the Water Supply system and hopefully it would be ready and published within a few days from now. I don't know why I can't upload a .gif file but anyway once the program gets ready then I will prepare a YouTube video for the program and publish it on my channel. https://www.youtube.com/c/TharwatAlshoufi/featured?view_as=subscriber" rel="nofollow - Regards.
|
Posted By: philippe JOSEPH
Date Posted: 30.Aug.2020 at 08:40
|
Hello Tharwat, I took a very quick look at : Fire Fighting Angle Supports and Pipe Sizing program. and I saw : ? 21/2" mm , it's not correct, it should be ; 2 1/2" DIA. Maybe the : mm is included in your dimension suffix. Sorry, I'm trying to write here the "euro" symbol for DIA. ( diameter ) but instead : ? or \U+2205 or %%C
|
Posted By: Tharwat
Date Posted: 30.Aug.2020 at 09:09
Hi Philippe, That mm suffix is an option to the user and its not obligatory and I was giving an explanation about the usage of the program and did not remove it once I switched the system to Imperial by mistake so its up to the user to add any other string value as they desire or leave it empty. The format of the imperial pipe size is also not a big thing and I can modify the program based on the user's needs and I went with that way to shorten the length of the text and nothing more than that. Thank you for your kind comments.
|
philippe JOSEPH wrote:Posted By: philippe JOSEPH
Date Posted: 30.Aug.2020 at 09:10
|
OK I have seen where the writing is : And don't forget to place a space between the dimension and the unit : 25 mm ( OK ) , 25mm ( NOT OK ). This is valid for all the dimensions except for degrees like : 25°C for example.  |
Posted By: Tharwat
Date Posted: 30.Aug.2020 at 10:15
It is already available in the program and I already used that option in the video and added a space before the mm chars but it seems that you did not watch the video to the end or so.
It is already there and in the same snapshot that your brought from the program and it is represented with %%C.  |
Posted By: philippe JOSEPH
Date Posted: 30.Aug.2020 at 11:30
| Hello again Tharwat, anyway your programs look very well done and usefull to with their bocks of components and the way to install them with the texts !!! |
Posted By: Tharwat
Date Posted: 30.Aug.2020 at 11:43
|
Thank you. I am glad to know your kind feedback about my programs. @Moderators. I am not receiving any email once any of members of the forum contribute in the same threaded that I already posted in although that I already enabled the option to receive an email for the new replies in the same thread. Thanks.
|
Posted By: Tharwat
Date Posted: 07.Sep.2020 at 22:46
|
Hello everyone, I have just published the Isometric Water Supply program release - 1.0.0 a few minutes ago, so here is the link to the program on my website. https://autolispprograms.wordpress.com/isometric-water-supply-program/" rel="nofollow - https://autolispprograms.wordpress.com/isometric-water-supply-program/
------------- https://autolispprograms.wordpress.com/ |
Posted By: Tharwat
Date Posted: 05.Oct.2020 at 21:50
|
Hello, Do you have any question ? ------------- https://autolispprograms.wordpress.com/ |