help designing bikes wheels and tires using Auto I
Printed From: CAD Forum
Category: EN
Forum Name: Inventor
Forum Description: Discussion about Autodesk Inventor
URL: https://www.cadforum.cz/forum_en/forum_posts.asp?TID=1380
Printed Date: 09.May.2026 at 00:57
Topic: help designing bikes wheels and tires using Auto I
Posted By: deacon
Subject: help designing bikes wheels and tires using Auto I
Date Posted: 28.Nov.2008 at 00:29
Hey guys, I am new to the Auto Desk Inventor software and I am a big problem designing the wheels and tires.
I made a circle, extruded it and now i need to throw in some spokes.
I also need the spokes to coincide with the outer circle I have drawn .
Any suggestions ?? Your help will be extremely appreciated
-------------
Louis Frausto
|
Replies:
Posted By: ephex
Date Posted: 13.Dec.2008 at 17:58
if your making the wheel to scale, id make the outer rim using the revolve feature to start, then create the other parts separate. so you would draw a profile of a section of the outer rim, use x-axis as your centerline, then revolve the profile around the centerline. id also do the same with the hub. this should get you started
-------------
C.B.
|
|