Print Page | Close Window

CREATE MACRO OR CODE FORMULAR

Printed From: CAD Forum
Category: EN
Forum Name: AutoCAD
Forum Description: Discussion about AutoCAD and AutoCAD LT, viewers, DWG and DWF formats, Design Review, AutoCAD 360, add-ons
URL: https://www.cadforum.cz/forum_en/forum_posts.asp?TID=14676
Printed Date: 26.May.2026 at 06:10


Topic: CREATE MACRO OR CODE FORMULAR
Posted By: windwardmi
Subject: CREATE MACRO OR CODE FORMULAR
Date Posted: 26.Nov.2024 at 03:47
I would like to do the following in Autocad LT.

Insert a thickness and show in brackets the percentage based of stated number.

I.e Original Thickness of .500" plate was found to be .250" due to wastage. Plate only has a wastage limit of 25% 

Drawing should show this after input of original, actual reading in macro request.  .250"(.50%)  Red to show if actual thickness reading inputed is 75% or more wasted then original thickness.  Black if greater 76%

If further info is needed just ask.


Print Page | Close Window