Print Page | Close Window

broken section veiws

Printed From: CAD Forum
Category: EN
Forum Name: Inventor
Forum Description: Discussion about Autodesk Inventor
URL: https://www.cadforum.cz/forum_en/forum_posts.asp?TID=2209
Printed Date: 06.Jul.2026 at 11:03


Topic: broken section veiws
Posted By: dam0927
Subject: broken section veiws
Date Posted: 15.Jul.2009 at 21:37
I'm using Inventor 11, SP2.
 
I'm having trouble creating a broken section view.  Here's what I've done so far. 
 
I have created a Work Plain through a tapped hole in the model.  I then created a sketch in the model on the new Work Plain, sketching a closed section.  Everything appears to be saved correctly.
 
In the drawing, I select the view in which to display the broken out section and receive the message "This view does not contain a sketch with a closed profile."
 


Replies:
Posted By: victorot
Date Posted: 24.Aug.2009 at 21:34
You can do the following:
1. In .idw enviornment select the view that you wanna create a "broken section view".
2. Click on CREATE SKETCH tool
3. Draw a sketch that will be used as reference.
4. Finish Sketch
5. Select the BREACK OUT tool
6. Select the VIEW
7. "Boundary" -> select the profile (sketch)
8. "Depth" -> Reference depth to create the "break" the reference can be taken of another VIEW, or simply entry with some value.
9. "Display" -> visualization option
10. Click OK.




-------------
Victor Oliveira Tolentino

T: (+55) 5502-0000
F: (+55) 9653-4189


Print Page | Close Window