Print Page | Close Window

Lines run past objects

Printed From: CAD Forum
Category: EN
Forum Name: Revit
Forum Description: Discussion about the BIM application Autodesk Revit (Architecture, Structure, MEP)
URL: https://www.cadforum.cz/forum_en/forum_posts.asp?TID=2298
Printed Date: 03.May.2026 at 07:03


Topic: Lines run past objects
Posted By: cure4glass
Subject: Lines run past objects
Date Posted: 12.Aug.2009 at 16:46

I am using the Plot Style manager to manage lines on a drawing. Everything is good except that when I run these lines into an object, the plotted line will extend beyond the object that it’s supposed to be connected to. I have experimented with the Line End Style but still have the same issue. Any pointers would be appreciated.

btw, I always make the end point to the midpoint of object, and it looks correct before plotting. 

The lines are set with the following parameters in the Plot Style manager:

Enable Dithering = On

Grayscale=Off

Use Assigned Pen # =Auto

Screening =100

Linetype=Use Object Linetype

Adaptive Adjustment=On

Line weight=1.200 mn

Line End Style=Butt

Line Join=Use Object Join Style

Fill Style=Use Object Fill Style

 

 


Replies:
Posted By: Vladimir Michl
Date Posted: 17.Aug.2009 at 22:10
Try to plot the drawing first to a DWF file and then print the DWF file with Design Review - it may be caused by the driver settings.

-------------
Vladimir Michl (moderator)
ARKANCE - https://arkance.world" rel="nofollow - https://arkance.world - Autodesk Platinum Partner


Print Page | Close Window