Print Page | Close Window

Inventor pump IPT

Printed From: CAD Forum
Category: EN
Forum Name: Inventor
Forum Description: Discussion about Autodesk Inventor
URL: https://www.cadforum.cz/forum_en/forum_posts.asp?TID=2351
Printed Date: 08.May.2026 at 09:54


Topic: Inventor pump IPT
Posted By: KELLYCO
Subject: Inventor pump IPT
Date Posted: 26.Aug.2009 at 15:47
anybody know of site i can find pumps and motor IPT or step files?


Replies:
Posted By: Vladimir Michl
Date Posted: 27.Aug.2009 at 10:38
Have you tried:
http://www.cadforum.cz/catalog_en/?q=pump - http://www.cadforum.cz/catalog_en/?q=pump
http://www.cadforum.cz/catalog_en/?cat=53 - http://www.cadforum.cz/catalog_en/?cat=53
http://www.cadforum.cz/catalog_en/?cat=29 - http://www.cadforum.cz/catalog_en/?cat=29
http://www.cadforum.cz/catalog_en/?q=motor&frm=IPT&3D=3D - http://www.cadforum.cz/catalog_en/?q=motor&frm=IPT&3D=3D
?


-------------
Vladimir Michl (moderator)
ARKANCE - https://arkance.world" rel="nofollow - https://arkance.world - Autodesk Platinum Partner

Posted By: KELLYCO
Date Posted: 27.Aug.2009 at 13:30
thank you very much

Posted By: KobusErasmus
Date Posted: 14.Oct.2009 at 18:23
You can also try the actual pump manufacturers, i.e. http://www.grundfos.com - www.grundfos.com , http://www.ksb.com - www.ksb.com , etc.  This then implies that you should either know the specific model you want or what the parameters are so you can do a web pump selection.  Most pump manufacturers are quite helpful if you contact them.  Also under the "Supplier Content Centre" (click on the "Web" button top menu) there are some manufacturers of pumps listed.

-------------
Kobus Erasmus
Piping design draughting
Contract draughting


Print Page | Close Window