Print Page | Close Window

Civil 3D 2011 drawing into Civil 3D 2010

Printed From: CAD Forum
Category: EN
Forum Name: AutoCAD
Forum Description: Discussion about AutoCAD and AutoCAD LT, viewers, DWG and DXF formats, Design Review, AutoCAD web, Drive, add-ons
URL: https://www.cadforum.cz/forum_en/forum_posts.asp?TID=4431
Printed Date: 03.Sep.2026 at 05:21


Topic: Civil 3D 2011 drawing into Civil 3D 2010
Posted By: GoulaKid
Subject: Civil 3D 2011 drawing into Civil 3D 2010
Date Posted: 23.Sep.2010 at 16:37
When opening a drawing from one of our clients who is using AutoCAD Civil 3D 2011 (I am using AutoCAD Civil 3D 2010) I get the following message:
“This drawing was created with a newer version of Civil 3D. All

Entities created by Civil 3D within the drawing are in a proxy

State. Additionally, all commands, settings, and displays of Civil

3D are disabled for this drawing.”

 

I have contacted the client and they are saving the drawing by default to an AutoCAD 2010 format. When I continue to open the drawing I get squares/rectantangles in place of points with the following written in the bottom of each box "AeccDbCogoPoint (AeccLand80) and none of the contours come in although the contour lables come in.

 

I have checked the "demandload" command and it is set to <3>.

 

Has anyone else had this problem and or could someone give me some options to try to resolve the issue?

 

Thanks in advance


Replies:
Posted By: Vladimir Michl
Date Posted: 23.Sep.2010 at 17:25
Civil 3D has no special function for saving to older versions of Civil objects. You can use LandXML - see:
http://www.cadforum.cz/cadforum_en/how-to-save-civil-3d-objects-to-an-older-version-tip7518 - http://www.cadforum.cz/cadforum_en/how-to-save-civil-3d-objects-to-an-older-version-tip7518


-------------
Vladimir Michl (moderator)
ARKANCE - https://arkance.world" rel="nofollow - https://arkance.world - Autodesk Platinum Partner


Print Page | Close Window