Print Page | Close Window

Change Units to meters

Printed From: CAD Forum
Category: EN
Forum Name: AutoCAD
Forum Description: Discussion about AutoCAD and AutoCAD LT, viewers, DWG and DXF formats, Design Review, AutoCAD web, Drive, add-ons
URL: https://www.cadforum.cz/forum_en/forum_posts.asp?TID=454
Printed Date: 12.Jun.2026 at 22:31


Topic: Change Units to meters
Posted By: chetauin
Subject: Change Units to meters
Date Posted: 04.Feb.2008 at 10:59
Hi
 
I want to change the units from millimeters to metres. How can I do it.
 
Cheers
 
Chetu


Replies:
Posted By: Vladimir Michl
Date Posted: 04.Feb.2008 at 11:20
AutoCAD drawing units are unitless. You need the physical units only for dimensioning and plotting - there are scale settings for these two tasks.
 
Otherwise you can scale down your drawing with the SCALE command.


-------------
Vladimir Michl (moderator)
ARKANCE - https://arkance.world" rel="nofollow - https://arkance.world - Autodesk Platinum Partner

Posted By: chetauin
Date Posted: 04.Feb.2008 at 11:25
I have received a drawing which is in millimeters. But now for my easy working I need to start working in meters. So as you mentioned shall i scale the model ?
 
Well for plot I don't mind because I might not plot the drawing 1:1 scale.

Posted By: Arben.Allaraj
Date Posted: 04.Feb.2008 at 12:22
 
 
If you want work in meters of course you should scale it with 1000 factor.
Dont forget 1:1 it means 1 unit (meter in drawing) = 1 unit (Meter in your letter).


-------------
Ing Arben.Allaraj
http://cad-drafting-corner.blogspot.com

Posted By: spen1967
Date Posted: 12.Feb.2008 at 13:50
Hi,

I have AutoCAD set to millimeters and I regularly receive drawings that have been done on a machines set to meters.

The previous answers are correct, you will need to scale all objects by a thousand. However here's a tip - before doing this ensure all objects are visible and selectable. ie all layers unlocked, unfrozen and on.


Print Page | Close Window