Print Page | Close Window

AutoCAD block - bollard

Printed From: CAD Forum
Category: EN
Forum Name: AutoCAD
Forum Description: Discussion about AutoCAD and AutoCAD LT, viewers, DWG and DWF formats, Design Review, AutoCAD 360, add-ons
URL: https://www.cadforum.cz/forum_en/forum_posts.asp?TID=4559
Printed Date: 23.Apr.2026 at 16:46


Topic: AutoCAD block - bollard
Posted By: Concat
Subject: AutoCAD block - bollard
Date Posted: 05.Oct.2010 at 16:49
Hi 
Does anyone have AutoCAD block of "Bollards" in plan and elevation?  thanks



-------------
Thanks Concat


Replies:
Posted By: CarlB
Date Posted: 05.Oct.2010 at 22:35
There are all sorts of bollards, which is basically a post in the ground. You could use a fence post detail and cut it off 42" or so above the ground.
 
In plan view use an open or a filled circle, pretty simple.
 
Depending on purpose, bollard can be 4" to 12" diameter, wood (square in section) or steel (sometimes concrete filled), set 3 feet to 4 feet in the ground, sometimes surrounded in concrete 18" in diameter or so. Extends 3 feet to 4 feet above ground.
 
If needs to be highly visible, paint "safety yellow".
 
 

Posted By: rob s
Date Posted: 14.Oct.2010 at 00:49
I agree with Carl. There are lots of types of bollards. I gathered lots of blocks of bollards on http://www.kantengineering.com/Autocadblocks.com" rel="nofollow - http://www.kantengineering.com/Autocadblocks.com . Now I am trying to do the same on my English site http://www.acad-blocks.com" rel="nofollow - http://www.acad-blocks.com , but that is a bit harder.

-------------
Visit http://www.acad-blocks.com" rel="nofollow - http://www.acad-blocks.com

Posted By: rob s
Date Posted: 15.Oct.2010 at 21:41

I added some blocks of bollards on my website http://www.acad-blocks.com" rel="nofollow - http://www.acad-blocks.com . If you need other blocks just fill in the request form on the same site.



-------------
Visit http://www.acad-blocks.com" rel="nofollow - http://www.acad-blocks.com


Print Page | Close Window