Print Page | Close Window

Breaking multiple lines using a cross- line

Printed From: CAD Forum
Category: EN
Forum Name: AutoCAD
Forum Description: Discussion about AutoCAD and AutoCAD LT, viewers, DWG and DWF formats, Design Review, AutoCAD 360, add-ons
URL: https://www.cadforum.cz/forum_en/forum_posts.asp?TID=4576
Printed Date: 01.Jun.2026 at 00:08


Topic: Breaking multiple lines using a cross- line
Posted By: djp6
Subject: Breaking multiple lines using a cross- line
Date Posted: 07.Oct.2010 at 11:11

Hi

Using 2008.

How do you break multiple lines along a line?

I.e. you have ten horizontal lines 3m long and one vertical line running down the centre of the 3m lines. I need to break the horizontal lines in two where they touch the vertical line without having a line smaller then 1.5m.

On a single line I can do it using the F command and clicking twice on the intersection but is it possible to select multiple lines ant the same time and use the crossing line to cut along?

Any help would be much appreciated.

Cheers

 


Replies:
Posted By: scottie2065
Date Posted: 07.Oct.2010 at 12:47
from my experience you can cut multiple line using F
just select the cutting lines press enter and you can cut whatever lines you like.
hope this helps


Print Page | Close Window