Print Page | Close Window

AutoCAD Tip: How to use Ellipses and Splines as Island Boundary Object

Printed From: CAD Forum
Category: EN
Forum Name: RSS Feeds
Forum Description: Automatic publishing of CAD information from other web sources
URL: https://www.cadforum.cz/forum_en/forum_posts.asp?TID=4626
Printed Date: 17.Apr.2026 at 22:25


Topic: AutoCAD Tip: How to use Ellipses and Splines as Island Boundary Object
Posted By: BetweenTheLines
Subject: AutoCAD Tip: How to use Ellipses and Splines as Island Boundary Object
Date Posted: 14.Oct.2010 at 12:24

Problem: Ellipses and Splines are ignored by the Presspull command when used as island boundary objects.

Workaround: Turn off Selection Preview.

http://autodesk.blogs.com/.a/6a00d8341bfd0c53ef0133f5100be2970b-pi">Original geometry

http://autodesk.blogs.com/.a/6a00d8341bfd0c53ef0133f5100bfc970b-pi">Selectionpreview = 3

http://autodesk.blogs.com/.a/6a00d8341bfd0c53ef0133f5100c14970b-pi">Selectionpreview = 0

Original geometry

Presspull with

Selectionpreview = 3

Presspull with

Selectionpreview = 0
Hint: When using Presspull with Selection Preview off, you must place your cross hairs within the boundary before the command is executed.

Thanks to Cliff Young of the http://www.autodesk.com/autocad - AutoCAD QA Team for this AutoCAD Tip.

http://feeds.feedburner.com/~ff/blogs/btl?a=J5s2ZRKZ6KI:aXGXNGu8Ok8:yIl2AUoC8zA"> http://feeds.feedburner.com/~ff/blogs/btl?a=J5s2ZRKZ6KI:aXGXNGu8Ok8:qj6IDK7rITs"> http://feeds.feedburner.com/~ff/blogs/btl?a=J5s2ZRKZ6KI:aXGXNGu8Ok8:sHskjighKVI">

Go to the http://feedproxy.google.com/~r/blogs/btl/~3/J5s2ZRKZ6KI/autocad-presspull-tip-how-to-use-ellipses-and-splines-as-island-boundary-objects-with-presspull.html - original post...



-------------
http://autodesk.blogs.com/between_the_lines/" rel="nofollow - Between the Lines - Autodesk blog by Shaan Hurley


Print Page | Close Window