Print Page | Close Window

masses as walls

Printed From: CAD Forum
Category: EN
Forum Name: Revit
Forum Description: Discussion about the BIM application Autodesk Revit (Architecture, Structure, MEP)
URL: https://www.cadforum.cz/forum_en/forum_posts.asp?TID=476
Printed Date: 25.May.2026 at 22:46


Topic: masses as walls
Posted By: jecaper
Subject: masses as walls
Date Posted: 12.Feb.2008 at 14:33
I am constructing a tilt-wall building and have created my panels as masses.  I could not figure out any other way to add the correct reveals and joints. 

The problem is that now that I add them to my project, the windows, doors and other elements that connect to them disappear.

How can I turn the panels into wall elements to attach windows to?

Thanks


Replies:
Posted By: Vladimir Michl
Date Posted: 17.Feb.2008 at 18:56
There are other ways for constructing sloped walls - see e.g.:
http://www.cadforum.cz/cadforum_en/qaID.asp?tip=5337 - http://www.cadforum.cz/cadforum_en/qaID.asp?tip=5337


-------------
Vladimir Michl (moderator)
ARKANCE - https://arkance.world" rel="nofollow - https://arkance.world - Autodesk Platinum Partner

Posted By: moma
Date Posted: 27.Feb.2008 at 07:42
I had the some problem
after creating mass choose the wall comand
then pick faces it would creat a wall
good luck

Posted By: Snoof
Date Posted: 10.Apr.2008 at 11:11
Don't use massing... go to mdelling and create, then choose in-place wall. the principles are the same as for massing, but revit will create the object as a wall and so can have openings, doors and windows inserted. Also it can then be scheduled etc.
 
Justin
 
www.revitup.co.za


-------------
Fear is the mind killer

www.revitup.co.za


Print Page | Close Window