Print Page | Close Window

Subassembly cross slope

Printed From: CAD Forum
Category: EN
Forum Name: Civil 3D, Map, InfraWorks
Forum Description: Discussion about mapping and GIS applications Map, Civil3D, InfraWorks, MapGuide and Raster Design
URL: https://www.cadforum.cz/forum_en/forum_posts.asp?TID=5242
Printed Date: 13.May.2026 at 01:03


Topic: Subassembly cross slope
Posted By: bobbylou
Subject: Subassembly cross slope
Date Posted: 01.Feb.2011 at 19:37
Is it possible to have the subgrade surface at -3%, the subbase surface  at -3% and the base and asphalt surfaces at -2%?  If so, how do you do it?  Is it a specific subassembly that I need?


Print Page | Close Window