Moving to 3D
Printed From: CAD Forum
Category: EN
Forum Name: CAD - general
Forum Description: General discussion about CAD, formats, standards, management, licensing, networking, harware, other CAD applications
URL: https://www.cadforum.cz/forum_en/forum_posts.asp?TID=5310
Printed Date: 01.Oct.2026 at 17:15
Topic: Moving to 3D
Posted By: Karl Ave
Subject: Moving to 3D
Date Posted: 15.Feb.2011 at 13:18
|
Hi all, I am currently using a 2D Cad package but I would like to move into the 3D environment. I’m not sure which is the best route to go at the moment. I am mainly detailing staircases, handrails, small steelwork jobs and sheet metal. Please advise? I have used StruCad before and it's obviously great for structural steel but I don't do enough heavy stuff to justify a purchase. I've heard of SolidWorks and Solid Edge but what about AutoCAD 3D?
Cheers.
|
Replies:
Posted By: HAWDesigner
Date Posted: 15.Feb.2011 at 14:01
|
Which version of AutoCAD are you using now? Since 2009, Autodesk has built in 3D functionality and from the sounds of it, that may handle your needs. If you're looking for more reality, then you can go with the more expensive Revit Architecture or Inventor. Or, if you're looking for animation you can go with the even more expensive 3DS Max. If you want to provide a little more information we may be able to more accurately direct you. Good Luck!! ------------- -- R. Williams AutoCAD 2010 Certified Professional <!-- If all else fails hit F1 --> <<AutoCAD 2009 |
Posted By: John Connor
Date Posted: 15.Feb.2011 at 18:00
|
What's your budget too?
What 2D CAD software are you currently using? ------------- "Humans have a strength that cannot be measured. This is John Connor. If you are reading this, you are the resistance." <<AutoCAD 2015>> |
Posted By: Karl Ave
Date Posted: 16.Feb.2011 at 13:08
Thanks for your replies.
Are there any courses / training available for AutoCAD 3D? Can the software produce manufacturing drawings?
|
HAWDesigner wrote:Posted By: John Connor
Date Posted: 16.Feb.2011 at 13:18
|
Courses and training in AutoCAD 3D are available from a number of sources. You can attend a local community college, take a 2 or 3 day seminar at an authorized AutoDesk reseller, do distance learning via an online course just to name three options.
AutoCAD can be used to produce manufacturing drawings but you may want to look at Inventor.
You never answered my question about your budget for purchasing software nor what program you are currently using. ------------- "Humans have a strength that cannot be measured. This is John Connor. If you are reading this, you are the resistance." <<AutoCAD 2015>> |
Posted By: HAWDesigner
Date Posted: 16.Feb.2011 at 15:42
|
Yes. Absolutely, Karl. Check this thread out: http://www.cadforum.cz/forum_en/forum_posts.asp?TID=5273 - YouTube AutoCAD Thread There are all types of videos from your basic 2D drawings to full color 3D. Good Luck!! ------------- -- R. Williams AutoCAD 2010 Certified Professional <!-- If all else fails hit F1 --> <<AutoCAD 2009 |
Posted By: Karl Ave
Date Posted: 16.Feb.2011 at 17:32
|
John, I'm currently using AutoCAD 2011. My budget depends on my boss i.e. nothing.
|
Posted By: John Connor
Date Posted: 16.Feb.2011 at 19:26
|
Then welcome to the wonderful world of generic AutoCAD and 3D. Don't get me wrong though. I use it every day to work on 3D fabrication drawings. Currently I am doing a layout of a 3,000 gallon reactor, side arm heat exchanger and its supporting frame, a platform (with columns and kneebraces) plus grating and safety rail for the workmen. Did it all from scratch too. ------------- "Humans have a strength that cannot be measured. This is John Connor. If you are reading this, you are the resistance." <<AutoCAD 2015>> |
Posted By: Karl Ave
Date Posted: 18.Feb.2011 at 10:36
Sounds good John, similar to what I do. I've enquired at the local colleges for part time 3D courses and hope to enroll soon, cheers.
|
Posted By: webgain
Date Posted: 21.Feb.2011 at 07:05
|
yeah... joining a part time college course is best for learning.
------------- http://www.vmdcadconversion.com/microstation-conversion.html" rel="nofollow - Microstation Conversion | CAD Conversions |