Print Page | Close Window

Structural Members Catalog

Printed From: CAD Forum
Category: EN
Forum Name: Civil 3D, Map, InfraWorks
Forum Description: Discussion about mapping and GIS applications Map, Civil3D, InfraWorks, MapGuide and Raster Design
URL: https://www.cadforum.cz/forum_en/forum_posts.asp?TID=5319
Printed Date: 13.May.2026 at 05:20


Topic: Structural Members Catalog
Posted By: John Connor
Subject: Structural Members Catalog
Date Posted: 16.Feb.2011 at 19:22
It almost sounds like you are looking at a "sample" instead of the "full" library.
What happens if you right-click on one of the tabs way down at the bottom where they all tend to bunch up and overlap each other?  Do you get a flyout menu?


-------------
"Humans have a strength that cannot be measured. This is John Connor. If you are reading this, you are the resistance."

<<AutoCAD 2015>>


Replies:
Posted By: RENEEMC
Date Posted: 16.Feb.2011 at 20:17
Actually I tried placing a WF beam from the Design Center and discovered that when I select it, I get a drop down menu to choose the size I need. That will work for now, but a "full" Library would be nice. Steel joists are not one of the options so I'm going to wing-it! I don't normally do structural; I'm usually modeling corridors and the usual Civil stuff.


Print Page | Close Window