Print Page | Close Window

SlopeTick updated

Printed From: CAD Forum
Category: EN
Forum Name: ARKANCE (CAD Studio) applications
Forum Description: Questions and discussion about applications by ARKANCE and Be.Smart - T4R, T4I, Civil Tools, DWGtext, GeoRefImg, XLSparam, FLAY, JobTime, GeoCode, TRANS, LT Extension,...
URL: https://www.cadforum.cz/forum_en/forum_posts.asp?TID=5871
Printed Date: 08.Jul.2026 at 17:37


Topic: SlopeTick updated
Posted By: Vladimir Michl
Subject: SlopeTick updated
Date Posted: 12.May.2011 at 08:27
The slope hatch utility (batter lines) SlopeTick has been updated for more precise tick marks on some types of slope edges.
 
See Download and the tip:
http://www.cadforum.cz/cadforum_en/slope-hatches-batter-lines-in-autocad-tip7965 - http://www.cadforum.cz/cadforum_en/slope-hatches-batter-lines-in-autocad-tip7965


-------------
Vladimir Michl (moderator)
ARKANCE - https://arkance.world" rel="nofollow - https://arkance.world - Autodesk Platinum Partner


Replies:
Posted By: fucis
Date Posted: 24.Oct.2011 at 16:15
Command: SLOPETICK
Slope ticker
Specify the distance between slope ticks <2.00>:
Select the upper edge:
Select the upper edge:
Select the bottom edge:
Flip ticks? [Yes/No] <No>: Y
; error: bad argument type: 2D/3D point: (489410.0 6.08664e+006 0.0 489412.0
6.0867e+006 0.0)

very often error.... than the angle between lines are big...


Print Page | Close Window