Print Page | Close Window

Command: CHAMFER Printed From: CAD Forum Category: EN Forum Name: AutoCAD Forum Description: Discussion about AutoCAD and AutoCAD LT, viewers, DWG and DXF formats, Design Review, AutoCAD web, Drive, add-ons URL: https://www.cadforum.cz/forum_en/forum_posts.asp?TID=6031 Printed Date: 03.Sep.2026 at 07:15 Topic: Command: CHAMFER Posted By: m2double Subject: Command: CHAMFER Date Posted: 07.Jun.2011 at 12:28 Hello, What is the reverse comand for Chamfer (working with 3D solids)? Replies: Posted By: John Connor Date Posted: 07.Jun.2011 at 18:09 There isn't any.  Use Chamfer with a "0" setting instead. ------------- "Humans have a strength that cannot be measured. This is John Connor. If you are reading this, you are the resistance." <<AutoCAD 2015>> Posted By: Joferna Date Posted: 25.Jun.2011 at 05:22 I  want to share this info about chamfer  with you.  If you have two solids  say a  circular  shaft  attached to a  circular plate  and if you  try to chamfer the  joint between the two solids , to make it look like a weld the chamfer will narrow  the  joint. However if you Union the two soilds  and then chamfer, you will get a a nice  weld like  chamfer at the joint.

Print Page | Close Window