Print Page | Close Window

text in a circular

Printed From: CAD Forum
Category: EN
Forum Name: CAD - general
Forum Description: General discussion about CAD, formats, standards, management, licensing, networking, harware, other CAD applications
URL: https://www.cadforum.cz/forum_en/forum_posts.asp?TID=6287
Printed Date: 28.Sep.2026 at 10:18


Topic: text in a circular
Posted By: micco
Subject: text in a circular
Date Posted: 21.Jul.2011 at 08:47
how to make a text in a circular shape.


Replies:
Posted By: severr
Date Posted: 21.Jul.2011 at 10:12
Try this

type TEXT and then Enter. Type just a single character, such as 'r' as the text.

Uuse the Array command to create a polar array of the text character. Select the text and give the exact number for total number of items prompt.

You will get 'r' in a circular path. You can then edit each text character and replace 'r' with the character you need.

I don't know other solution

Posted By: John Connor
Date Posted: 21.Jul.2011 at 11:50
I would recommend the use of the Arc Aligned Text command found on your Express Tools tab > Text panel.  The method described previously is just too tedious.

-------------
"Humans have a strength that cannot be measured. This is John Connor. If you are reading this, you are the resistance."

<<AutoCAD 2015>>

Posted By: Vladimir Michl
Date Posted: 21.Jul.2011 at 12:02
See the tip:
http://www.cadforum.cz/cadforum_en/qaID.asp?tip=6016 - http://www.cadforum.cz/cadforum_en/qaID.asp?tip=6016


-------------
Vladimir Michl (moderator)
https://www.linkedin.com/in/vmichl/" rel="nofollow - LinkedIn , Autodesk Expert Elite


Print Page | Close Window