Text size on labels in Paper Space
Printed From: CAD Forum
Category: EN
Forum Name: Civil 3D, Map, InfraWorks
Forum Description: Discussion about mapping and GIS applications Map, Civil3D, InfraWorks, MapGuide and Raster Design
URL: https://www.cadforum.cz/forum_en/forum_posts.asp?TID=64
Printed Date: 09.Jun.2026 at 22:24
Topic: Text size on labels in Paper Space
Posted By: mlski
Subject: Text size on labels in Paper Space
Date Posted: 28.Aug.2007 at 17:51
|
I have a Civil 3d question for you. Can you tell me why the points label is a different size in paper space then in model space. I have the point style set to absolute units and the point appears correct in model space and paper space, but not the point label. Can you tell me where the label setting is to correct this issue? Much appreciated.
|
Replies:
Posted By: Vladimir Michl
Date Posted: 28.Aug.2007 at 21:04
|
Civil3D tries to keep the paperspace (layout) labels always at the set fixed height. Set your label size to the requested size for paperspace (1:1) - e.g. 2.5 mm. When you set the proper Scale factor for the drawing, also the modelspace labels will be readable. See the Toolspace palette, Settings tab - right-click on the drawing name, choose "Edit drawing settings..." and set the Scale factor (top-right corner) in the Units and Zone tab. ------------- Vladimir Michl (moderator) ARKANCE - https://arkance.world" rel="nofollow - https://arkance.world - Autodesk Platinum Partner |
Posted By: mlski
Date Posted: 28.Aug.2007 at 21:42
|
VM-
Thanks!
mlski |
