Print Page | Close Window

AutoCAD 2008

Printed From: CAD Forum
Category: EN
Forum Name: AutoCAD
Forum Description: Discussion about AutoCAD and AutoCAD LT, viewers, DWG and DWF formats, Design Review, AutoCAD 360, add-ons
URL: https://www.cadforum.cz/forum_en/forum_posts.asp?TID=6440
Printed Date: 16.May.2026 at 00:02


Topic: AutoCAD 2008
Posted By: Dennis1188
Subject: AutoCAD 2008
Date Posted: 18.Aug.2011 at 15:44

I cannot remember the command for this… when I look at a dash line I would to adjust it so the dashes are not so close together.

Adjust the scale?

Some prints show the lines so close I have a hard time viewing them.

It’s a new computer and I lost my toolbar icon from my old computer where I used to click on it and enter a number like .1 and the lines would change in scale.


Replies:
Posted By: philippe JOSEPH
Date Posted: 18.Aug.2011 at 15:55
When you begin a new drawing , do use a "prototype" drawing including the colors , lines , texts , dimensions , formats etc... OK to your standards instead of openning Autocad and working with it.
If you set "LPTSCALE" to <1> you can use "hidden 2" and "centerlines 2" for tour hidden lines and center lines if you open a port in the paper space.
If you set "LPTSCALE" to <5> you can use "hidden" and "centerlines" for tour hidden lines and center lines if you open a port in the paper space.
If you print directly from the object space , do apply x 50 to "LPTSCALE" if your drawing scale is 1/50.
Ask for more is necessary.

Posted By: John Connor
Date Posted: 18.Aug.2011 at 17:35
Just so we are all clear about this are you printing from model space or from a paper space layout utilizing viewports?

-------------
"Humans have a strength that cannot be measured. This is John Connor. If you are reading this, you are the resistance."

<<AutoCAD 2015>>


Print Page | Close Window