Info Center Error
Printed From: CAD Forum
Category: EN
Forum Name: Civil 3D, Map, InfraWorks
Forum Description: Discussion about mapping and GIS applications Map, Civil3D, InfraWorks, MapGuide and Raster Design
URL: https://www.cadforum.cz/forum_en/forum_posts.asp?TID=6847
Printed Date: 12.May.2026 at 21:36
Topic: Info Center Error
Posted By: Head418B
Subject: Info Center Error
Date Posted: 04.Nov.2011 at 12:05
How do I get rid of the message "Autodesk Info Center has encountered a problem and needs to close. We are sorry for the inconvenience." It usually happens right in the middle of a command, of which you have to click OK or debug.
-------------
BFS
|
Replies:
Posted By: John Connor
Date Posted: 06.Nov.2011 at 15:20
Disable the Info Center?
-------------
"Humans have a strength that cannot be measured. This is John Connor. If you are reading this, you are the resistance."
<<AutoCAD 2015>>
|
Posted By: Head418B
Date Posted: 07.Nov.2011 at 12:29
Not sure how to do that John
-------------
BFS
|
Posted By: John Connor
Date Posted: 07.Nov.2011 at 16:18
Try this method.
http://otb.manusoft.com/2009/03/disable-infocenter-in-autocad-2010.htm
-------------
"Humans have a strength that cannot be measured. This is John Connor. If you are reading this, you are the resistance."
<<AutoCAD 2015>>
|
Posted By: Head418B
Date Posted: 07.Nov.2011 at 16:40
Thank you John....we shall see if this works. YOu have been a great resource. Autodesk never answers any of the reports that are sent after a fatal error.
-------------
BFS
|
Posted By: John Connor
Date Posted: 07.Nov.2011 at 18:44
AutoDesk would answer your questions if they weren't so busy trying to get more money out of your pocket.
-------------
"Humans have a strength that cannot be measured. This is John Connor. If you are reading this, you are the resistance."
<<AutoCAD 2015>>
|
Posted By: Head418B
Date Posted: 07.Nov.2011 at 18:59
I most certainly believe that.
-------------
BFS
|
Posted By: Head418B
Date Posted: 09.Nov.2011 at 21:13
Ok, now I have somehow lost all my coordinate systems when trying to select them in the edit drawing settings dialog. If I open an existing drawing with them already in place it gives me a "Coordinate System Code is not valid" Any help would be greatly appreciated. Thank you
-------------
BFS
|
|