drawing not regen when panning
Printed From: CAD Forum
Category: EN
Forum Name: AutoCAD
Forum Description: Discussion about AutoCAD and AutoCAD LT, viewers, DWG and DWF formats, Design Review, AutoCAD 360, add-ons
URL: https://www.cadforum.cz/forum_en/forum_posts.asp?TID=7164
Printed Date: 18.Apr.2026 at 06:41
Topic: drawing not regen when panning
Posted By: db.architecture
Subject: drawing not regen when panning
Date Posted: 11.Jan.2012 at 16:42
|
just trying auto cad 2012 on my new mac and every time i pan it is hit and miss if the screen regenerates properly, i loose most of the drawing and have to pan in out until the drawing appears in full. tried my settings but can't seem to stop, anyone else experienced this. wasn't sure if it was the mac or cad. Anyone help please post.
|
Replies:
Posted By: John Connor
Date Posted: 11.Jan.2012 at 18:34
Try this.
Type VIEWRES at the command prompt, say YES to fast zooms, and set your circle zoom percent to 5000. Test it. What happens?
-------------
"Humans have a strength that cannot be measured. This is John Connor. If you are reading this, you are the resistance."
<<AutoCAD 2015>>
|
Posted By: db.architecture
Date Posted: 11.Jan.2012 at 19:37
|
Tried several settings from 5000 up to 20000 does not seem to make any difference.
|
Posted By: John Connor
Date Posted: 11.Jan.2012 at 20:18
What are the specs on this computer?
-------------
"Humans have a strength that cannot be measured. This is John Connor. If you are reading this, you are the resistance."
<<AutoCAD 2015>>
|
Posted By: db.architecture
Date Posted: 11.Jan.2012 at 21:07
Mac os x lion 10.7.2
2.8ghz intel core i7
8gb 1333 mhz ddr3
and radeon hd 6770m 512mb
imac, brought this before i invested fully in a g machine, been many years since i last used a mac but cheesed off with the pc and thought id transfer back to the mac.
i will check on auto cad site for required spec.
|
Posted By: db.architecture
Date Posted: 11.Jan.2012 at 21:11
|
checked specification on auto cad site, main spec ok, says all graphics card on supported hardware?
|
Posted By: John Connor
Date Posted: 19.Jan.2012 at 13:58
What is REGENAUTO set to?
-------------
"Humans have a strength that cannot be measured. This is John Connor. If you are reading this, you are the resistance."
<<AutoCAD 2015>>
|
|