Simplify Your Inventor Models for use in Revit
Printed From: CAD Forum
Category: EN
Forum Name: RSS Feeds
Forum Description: Automatic publishing of CAD information from other web sources
URL: https://www.cadforum.cz/forum_en/forum_posts.asp?TID=7674
Printed Date: 15.Sep.2026 at 08:06
Topic: Simplify Your Inventor Models for use in Revit
Posted By: BetweenTheLines
Subject: Simplify Your Inventor Models for use in Revit
Date Posted: 15.Apr.2012 at 17:55
|
Keep http://www.autodesk.com/inventor - Inventor Solids Simple (KISS) when exporting. This new & free technology preview for http://www.autodesk.com/inventor - Autodesk Inventor 2013 named http://labs.autodesk.com/utilities/inventor_simplification/ - Inventor Simplification has just been posted on http;//usa.autodesk.com - http://labs.autodesk.com/ - Autodesk Labs allowing you to reduce models, include or exclude parts and remove IP before exporting for use in a http://www.autodesk.com/revit - Revit http://usa.autodesk.com/building-information-modeling/ - BIM model using the .adsk file format. In the past there has been the shrink wrap feature but that has now been expanded with more abilities to control what is exported. For example you may have a large assembly of a elevator (a lift for my friends outside the US) and do not need to send the new elevator mechanical design to be used the in Revit model the architect is building. You could shrink-wrap, fill holes, and export only the minimum parts required of the elevator in the Revit model. You could also be exporting a crane or cooling tower design for use in a large Revit BIM model as seen below. For a BIM model all the gears, motors and other contents inside a crane. http://autodesk.blogs.com/.a/6a00d8341bfd0c53ef01676528c4fc970b-pi"> If you are exporting your mechanical designs for use in BIM models you should definitely check this technology preview out. Inventor Simplification for Autodesk Inventor 2013
http://feeds.feedburner.com/~ff/blogs/btl?a=0iI4PWH98m4:2X4O9K1fmpc:yIl2AUoC8zA"> Go to the http://feedproxy.google.com/~r/blogs/btl/~3/0iI4PWH98m4/simplify-your-inventor-models-for-use-in-revit.html - original post... ------------- http://autodesk.blogs.com/between_the_lines/" rel="nofollow - Between the Lines - Autodesk blog by Shaan Hurley |