Print Page | Close Window

autocad zoom/pan/fill problem

Printed From: CAD Forum
Category: EN
Forum Name: Civil 3D, Map, InfraWorks
Forum Description: Discussion about mapping and GIS applications Map, Civil3D, InfraWorks, MapGuide and Raster Design
URL: https://www.cadforum.cz/forum_en/forum_posts.asp?TID=8608
Printed Date: 02.Jul.2026 at 18:50


Topic: autocad zoom/pan/fill problem
Posted By: srks1984
Subject: autocad zoom/pan/fill problem
Date Posted: 13.Nov.2012 at 13:41
hi,
 
i have a problem with autocad 2012, the problem is after opening a drawing if i press mouse mid button normally it should activate as pan command but its activating snap popup menu.... and i have to fill on every drawing.... please help anyone on this.....
 
 


Replies:
Posted By: John Connor
Date Posted: 13.Nov.2012 at 18:20
You mean you have to turn FILL "on" in each drawing you open?

Is MBUTTONPAN set to a value of 1?




-------------
"Humans have a strength that cannot be measured. This is John Connor. If you are reading this, you are the resistance."

<<AutoCAD 2015>>

Posted By: srks1984
Date Posted: 14.Nov.2012 at 04:50
thank you Mr.John for your reply..........
 
yes, FILL should be turn "on" for every drawing.
MBUTTONPAN value also to be set of "1"each time for every drawing. 
 

Posted By: John Connor
Date Posted: 14.Nov.2012 at 19:34
You could probably do both using the SETVAR command.  Include it in a lisp file that is loaded with each drawing.

-------------
"Humans have a strength that cannot be measured. This is John Connor. If you are reading this, you are the resistance."

<<AutoCAD 2015>>

Posted By: srks1984
Date Posted: 15.Nov.2012 at 13:30

John,

I tried this also.... we need to enter SETVAR(varibles) for every drawing...i think its came because some lisp files.
 


Print Page | Close Window