Print Page | Close Window

Mark chainages on centrelines

Printed From: CAD Forum
Category: EN
Forum Name: AutoCAD
Forum Description: Discussion about AutoCAD and AutoCAD LT, viewers, DWG and DWF formats, Design Review, AutoCAD 360, add-ons
URL: https://www.cadforum.cz/forum_en/forum_posts.asp?TID=8819
Printed Date: 01.Jun.2026 at 08:39


Topic: Mark chainages on centrelines
Posted By: DEEP2050
Subject: Mark chainages on centrelines
Date Posted: 07.Jan.2013 at 07:22
I want to mark chainages on polylines in autocad. Please suggest.


Replies:
Posted By: John Connor
Date Posted: 07.Jan.2013 at 11:48
Could you provide more detail?

What do you want to do, pick a line and have the distance entered automatically by AutoCAD?


-------------
"Humans have a strength that cannot be measured. This is John Connor. If you are reading this, you are the resistance."

<<AutoCAD 2015>>

Posted By: DEEP2050
Date Posted: 07.Jan.2013 at 12:45

Suppose there is a polyline of 5000 meters. I want chainages at an interval of say 10meters. Autocad should mark small ticks perpendicular to the selected polyline and mark texts as 0.00m, 10.00m, 20.00m..... and so on automatically adjacent to the small ticks. 

Posted By: heinsite
Date Posted: 08.Jan.2013 at 04:12
Vanilla AutoCAD isn't built to do this.  You would need Civil 3D for a suitable solution.  The closest you will get with AutoCAD alone would be to DIVIDE the polyline, but even that won't get you the annotations.  You'd have to do those manually.

Dave.


-------------
Dave Hein, P.E.
Hawaii District Engineer
Kona International Airport
AutoCAD Certified Professional
Autodesk Expert Elite

Posted By: John Connor
Date Posted: 08.Jan.2013 at 11:47
You might want to first see if you can find a custom lisp program that will do this.

There is one posted here...

http://forums.augi.com/showthread.php?52779-Stationing-Autolisp-routine

Another chainage lisp at....

https://sites.google.com/site/cometbjm/autocadlisps

Might also look at this as posted by the webmaster:

You can try the LGC3 command from the LGC utility (free). See:
http://www.cadforum.cz/cadforum_en/qaID.asp?tip=5883 - http://www.cadforum.cz/cadforum_en/qaID.asp?tip=5883



-------------
"Humans have a strength that cannot be measured. This is John Connor. If you are reading this, you are the resistance."

<<AutoCAD 2015>>

Posted By: John Connor
Date Posted: 08.Jan.2013 at 12:09
See previous post.


-------------
"Humans have a strength that cannot be measured. This is John Connor. If you are reading this, you are the resistance."

<<AutoCAD 2015>>


Print Page | Close Window