3D solid to 3D mesh
Printed From: CAD Forum
Category: EN
Forum Name: Civil 3D, Map, InfraWorks
Forum Description: Discussion about mapping and GIS applications Map, Civil3D, InfraWorks, MapGuide and Raster Design
URL: https://www.cadforum.cz/forum_en/forum_posts.asp?TID=8871
Printed Date: 13.May.2026 at 05:21
Topic: 3D solid to 3D mesh
Posted By: Nithin Peratla
Subject: 3D solid to 3D mesh
Date Posted: 20.Jan.2013 at 08:52
| Sir, I am working on 3D modelling of a building in AutoCAD 2010. The 3D model has 7 elements ie... walls, roof and its constituents and floor and its constituents. I have to mesh the 3D model created so that I can use the meshed model for further analysis. Is there any method for meshing the created 3D model in AutoCAD? |
Replies:
Posted By: Vladimir Michl
Date Posted: 20.Jan.2013 at 12:13
|
See the related tip: http://www.cadforum.cz/cadforum_en/how-to-convert-a-3dsolid-to-3dmesh-or-3dfaces-tip8318" rel="nofollow - http://www.cadforum.cz/cadforum_en/how-to-convert-a-3dsolid-to-3dmesh-or-3dfaces-tip8318 ------------- Vladimir Michl (moderator) ARKANCE - https://arkance.world" rel="nofollow - https://arkance.world - Autodesk Platinum Partner |
Posted By: John Connor
Date Posted: 20.Jan.2013 at 12:45
|
What kind of building were you drawing that you created it with a mesh? Seems a bit unusual. ------------- "Humans have a strength that cannot be measured. This is John Connor. If you are reading this, you are the resistance." <<AutoCAD 2015>> |
Posted By: Abhimanyu singh
Date Posted: 19.Feb.2013 at 12:58
|
The process of rapid prototyping is exactly like it sounds: prototypes
of products are quickly produced so that companies can move forward with
final production. it has grown from producing models and prototype parts alone to being
used by sculptors for art exhibits and used by manufacturing companies
to produce market ready parts in small numbers. ------------- http://www.prithu.co.in" rel="nofollow - Interior design in lucknow |
Posted By: Novarese
Date Posted: 19.Feb.2013 at 13:57
|
Not in this case, sir. I guess the OP was simply wanting to build VIRTUAL (not real) model for further analysis like FEM.
|
Abhimanyu singh wrote:
Posted By: John Connor
Date Posted: 19.Feb.2013 at 18:48
|
Abhi: What does rapid prototyping have to do with modeling a building inside of AutoCAD? ------------- "Humans have a strength that cannot be measured. This is John Connor. If you are reading this, you are the resistance." <<AutoCAD 2015>> |