Centerline
Printed From: CAD Forum
Category: EN
Forum Name: Civil 3D, Map, InfraWorks
Forum Description: Discussion about mapping and GIS applications Map, Civil3D, InfraWorks, MapGuide and Raster Design
URL: https://www.cadforum.cz/forum_en/forum_posts.asp?TID=9217
Printed Date: 09.Jun.2026 at 13:46
Topic: Centerline
Posted By: rezamonemi
Subject: Centerline
Date Posted: 15.May.2013 at 04:41
|
Hi Every One HELP Would you please create centerline between polylines in attach dwg file , like "Collapse Dual Lines" layer's that generated by "Arcmap" http://www.freeuploadsite.com/uploads/13685187661.rar" rel="nofollow - http://www.freeuploadsite.com/uploads/13685187661.rar
|
Replies:
Posted By: Novarese
Date Posted: 15.May.2013 at 08:38
|
You can't, sir. The best effort, in Autocad, will yield something like this:
|
Posted By: rezamonemi
Date Posted: 18.May.2013 at 06:33
| tanks for your consideration |
Posted By: rezamonemi
Date Posted: 18.May.2013 at 09:38
|
DEAR
Novarese Offset distances between polylines are not the same; so, we need either an autolisp routin or an map3d module. |