Draftsight Templates
Printed From: CAD Forum
Category: EN
Forum Name: CAD - general
Forum Description: General discussion about CAD, formats, standards, management, licensing, networking, harware, other CAD applications
URL: https://www.cadforum.cz/forum_en/forum_posts.asp?TID=9485
Printed Date: 29.Sep.2026 at 03:32
Topic: Draftsight Templates
Posted By: crelph
Subject: Draftsight Templates
Date Posted: 08.Aug.2013 at 17:05
Hello,
What are the different templates in Draftsight used for? When I start a new Draftsight project, I have a choice of about 8 different templates, what is each one used for, or what are the differences between them?
-------------
Connor
|
Replies:
Posted By: John Connor
Date Posted: 08.Aug.2013 at 17:33
Standard.dwt is the default. Most likely it is set up to use decimal inches as the default units.
Standardiso.dwt is probably for users of metric units.
Four look to be based on different international standards: standardjis, standardansi, standardbsi, and standarddin.
As for standardgb and standardgost I couldn't tell you.
Open each one up and see if you can notice any obvious differences.
OK...standardjis.dwt adheres to the Japanese Industrial Standards.
Standarddin.dwt adheres to German standards. Deutsches Institut fĂĽr Normung", meaning "German institute for standardisation."
Standardansi.dwt adheres to the American National Standards Institute guidelines.
Standardbsi.dwt adheres to the British Standards Institute guidelines.
Is that enough information for you?
BTW, you are aware that you can create your own template and populate it with the layers, text/dimension styles, linetypes, etc. that you want right? You can also set up a sheet with your own title block and border to be part of the template.
Since your profile lists your location as United States then unless you or your company does international work I'd stick with the default template.
-------------
"Humans have a strength that cannot be measured. This is John Connor. If you are reading this, you are the resistance."
<<AutoCAD 2015>>
|
Posted By: crelph
Date Posted: 08.Aug.2013 at 20:06
I appreciate the response. I am aware of creating my own template. My business had just started to work with Draftsight and they were wondering what could be done using the different templates.
That is enough information. Thank you again for your help and the timely response.
-------------
Connor
|
|