Autocad to Inventor
Printed From: CAD Forum
Category: EN
Forum Name: Inventor
Forum Description: Discussion about Autodesk Inventor
URL: https://www.cadforum.cz/forum_en/forum_posts.asp?TID=9525
Printed Date: 10.Jun.2026 at 02:09
Topic: Autocad to Inventor
Posted By: krumme
Subject: Autocad to Inventor
Date Posted: 13.Aug.2013 at 10:50
|
Gday guys I am sure you have probably got posts on this but i cant find what i need so i apologize if it is already out there. That being said i am an Autocad user and I have two robot skins designed in 2D in autocad that i would like to take into inventor, convert to 1mm aluminum sheet and roll to a set radius. One will sit over the top of the other (an inner and an outer skin)so I would like to get the doors and such lined up and i think inventor would be able to do this for me. Being an autocad user though I have no idea how to go about it. any help would be greatly appreciated. Thanks
|
Replies:
Posted By: ANGEL CAD2013
Date Posted: 17.Sep.2013 at 02:54
hola muchachos
-------------
ANGELCADMAGISTER
|
Posted By: ANGEL CAD2013
Date Posted: 17.Sep.2013 at 02:57
HOLA, SOY UN USUARIO DE INVENTOR, ME PUEDEN AYUDAR COMO HAGO UN RESORTE EN FORMA CIRCULAR COMO SI FUERA UNA RUEDA.
-------------
ANGELCADMAGISTER
|
Posted By: John Connor
Date Posted: 17.Sep.2013 at 11:48
krumme:
You aren't going to get much help from Angel. I suggest you go over to CADTutor and ask your question there. One of the forum members, JD Mather, should be able to help you. Tell him John Connor sent you. He'll probably say he doesn't know who I am but he really does. Good luck mate!
-------------
"Humans have a strength that cannot be measured. This is John Connor. If you are reading this, you are the resistance."
<<AutoCAD 2015>>
|
|