Print Page | Close Window

NOTHING APPEARING

Printed From: CAD Forum
Category: EN
Forum Name: AutoCAD
Forum Description: Discussion about AutoCAD and AutoCAD LT, viewers, DWG and DWF formats, Design Review, AutoCAD 360, add-ons
URL: https://www.cadforum.cz/forum_en/forum_posts.asp?TID=9642
Printed Date: 18.May.2026 at 19:20


Topic: NOTHING APPEARING
Posted By: jaggy2013
Subject: NOTHING APPEARING
Date Posted: 14.Sep.2013 at 20:52
Hello my dears'

I am facing problem with some toughest problem, Do help me dears,

When i am doing some thing on client drawings(eg, copy, paste, delete) after some time " Nothing is appearing on my drawing and its responds" REGENERATING MODEL, DRAWING IS BUSY" and when i use to cloase the drawing (Usually it will ask save "Yes" or "No" rite ?) But it doesn't ask. 

When i close the drawing nothing asking either to save or something. PLease help me what i have to do ?

I use to do modifications and after sometime nothing is there in drawings, Frequently its happening to me,


Replies:
Posted By: John Connor
Date Posted: 14.Sep.2013 at 23:12
You edit a drawing, go to close it and AutoCAD doesn't even ask if you want to save it?  That sounds serious.

When did this first start happening?

Does a dialog box appear onscreen?  If "no" do you see anything on the command line itself?



-------------
"Humans have a strength that cannot be measured. This is John Connor. If you are reading this, you are the resistance."

<<AutoCAD 2015>>

Posted By: heinsite
Date Posted: 15.Sep.2013 at 00:55
Is this happening in every drawing you work on, or just a particular one?

By any chance is your version of AutoCAD 2013 on Subscription?  If so, why not update it to 2014?  But if not, are you certain you have installed all available Service Packs and Hotfixes for it?  Check your installation and then go http://usa.autodesk.com/adsk/servlet/ps/dl/index?siteID=123112&id=2334435&linkID=9240618#section2" rel="nofollow - HERE to check and download files as needed.

Have you run an AUDIT on the file you're working on?

Have you PURGEd the file recently?

Do you have scale list bloat?

Have you recently installed new virus protection software?

Have you recently run any type of Registry cleaner?

You have an unusual problem that may be difficult to trouble shoot.  If all else fails you could try and see if this is unique to your computer or if it happens on another.  If it's just happening on your machine, then it's probably something to do with your version of AutoCAD.  If it happens with this file on another computer then there's likely something wrong with the file.

You need to do a bit more hunting and get back to us.

Dave.


-------------
Dave Hein, P.E.
Hawaii District Engineer
Kona International Airport
AutoCAD Certified Professional
Autodesk Expert Elite

Posted By: jaggy2013
Date Posted: 15.Sep.2013 at 21:26
Yes, When i am doing some modifications (Mostly erasing something) the whole drawing is not visible on my drawing.

Yeah, after diagram and i didn't try to save, But, Usually it will ask to save rite ???

No dialogue box and yeah can see " REGENERATING MODEL, DRAWING IS BUSY" NOthing else, and i work on AUTOCAD'13 during this happened. . .

Gimmie some ideas inorder to save my time, every tym i use to edit 5-6 tym's :( i feel pity of myself.

Posted By: jaggy2013
Date Posted: 15.Sep.2013 at 21:33
Almost all the drawings i work on AUTOCAD'13.

No idea abt second point, as i am basic learner and dunno how to check too. .

No i didn't use the command as you mentioned.

Nope, What is meant by purge. I havn't go through basic yet now.

No idea about scale list bloat ? Can you clearly explain abt this?

No, But it seems some updation done from my admin side,

No.

And other colleague Working on 2011, and she has the same problem,

I'm using '14 now, so far nothing happened like before.

BUT MOSTLY HAPPENED DURING WHEN I AM ERASING SOMETHING. .  BUT AM SURE I AM SELECTING THE PARTICULAR THING AND ERASING.

Posted By: John Connor
Date Posted: 16.Sep.2013 at 11:41
If you do not see your whole drawing while working in model space do a Zoom > All or a Zoom > Extents.  Now do you see the whole drawing?

Purging a drawing eliminates unreferenced objects such as linetypes, multileaders, layers, etc.  To do this one must use the PURGE command.  There are two versions of the command.  The first is PURGE and it will bring up a dialog box.  The second is the command line version -PURGE (notice the dash?).  I recommend using the second version and first purging REGAPPS.  Then repeat the command and do a Purge > All.

Audit is a command used to check the drawing database for errors.  This is usually run after one has purged a drawing.

It seems there is a whole lot about AutoCAD that you do not know.  Is there a CAD Manager?

If you are not seeing a dialog box when it comes to saving your drawing then maybe the system variable FILEDIA has been set to "0" instead of "1".  I would check if I were you.  Type FILEDIA at the command line and AutoCAD will report what the setting is.  Change it if necessary.

Is there any chance you are working in a paper space layout using viewports?

If all else fails you may have to run the REPAIR option.


-------------
"Humans have a strength that cannot be measured. This is John Connor. If you are reading this, you are the resistance."

<<AutoCAD 2015>>


Print Page | Close Window