Print Page | Close Window

entrance cross sections with wheel chair

Printed From: CAD Forum
Category: EN
Forum Name: Civil 3D, Map, InfraWorks
Forum Description: Discussion about mapping and GIS applications Map, Civil3D, InfraWorks, MapGuide and Raster Design
URL: https://www.cadforum.cz/forum_en/forum_posts.asp?TID=9829
Printed Date: 13.Jun.2026 at 12:07


Topic: entrance cross sections with wheel chair
Posted By: saifarzoo
Subject: entrance cross sections with wheel chair
Date Posted: 25.Nov.2013 at 06:28
i am new on auto cad. 
i want to make a cross section of the two gate witch size is 3 meters and in between there is planter box and there is two steps.



-------------
mohammad saidullah


Replies:
Posted By: John Connor
Date Posted: 25.Nov.2013 at 11:53
What exactly is your problem?  Do you have a plan view drawn up yet?


-------------
"Humans have a strength that cannot be measured. This is John Connor. If you are reading this, you are the resistance."

<<AutoCAD 2015>>

Posted By: saifarzoo
Date Posted: 25.Nov.2013 at 13:27
YA I HAVE

-------------
mohammad saidullah

Posted By: John Connor
Date Posted: 25.Nov.2013 at 13:34
Do you have any elevations drawn?


-------------
"Humans have a strength that cannot be measured. This is John Connor. If you are reading this, you are the resistance."

<<AutoCAD 2015>>

Posted By: saifarzoo
Date Posted: 25.Nov.2013 at 13:44
YA



-------------
mohammad saidullah

Posted By: John Connor
Date Posted: 25.Nov.2013 at 13:52
Then you should have no problem drawing the cross-section.


-------------
"Humans have a strength that cannot be measured. This is John Connor. If you are reading this, you are the resistance."

<<AutoCAD 2015>>

Posted By: saifarzoo
Date Posted: 25.Nov.2013 at 13:59
No exactly i dont know how i make the cross section ! 

-------------
mohammad saidullah

Posted By: John Connor
Date Posted: 25.Nov.2013 at 14:09
It will depend on where your cut line is located on the plan view.  Everything in front of the line will be shown in elevation.  Everything behind the line will not be shown.


-------------
"Humans have a strength that cannot be measured. This is John Connor. If you are reading this, you are the resistance."

<<AutoCAD 2015>>

Posted By: saifarzoo
Date Posted: 25.Nov.2013 at 14:17
CAN U SEND ME ONE LIKE THIS DESIGN ?
IF U DON'T MIND




-------------
mohammad saidullah

Posted By: John Connor
Date Posted: 25.Nov.2013 at 14:19
How about you upload a copy of your drawing instead so we all have a clearer picture of what you are working with?

It can be a DWG file and you're limited to a max file size of 500KB.  If the file size is greater than that you'll have to zip the file.




-------------
"Humans have a strength that cannot be measured. This is John Connor. If you are reading this, you are the resistance."

<<AutoCAD 2015>>

Posted By: saifarzoo
Date Posted: 25.Nov.2013 at 14:24
YA I WILL USE THE ZIP FILE !

-------------
mohammad saidullah

Posted By: John Connor
Date Posted: 25.Nov.2013 at 14:28
What program are you using?  Is it Civil 3D?


-------------
"Humans have a strength that cannot be measured. This is John Connor. If you are reading this, you are the resistance."

<<AutoCAD 2015>>

Posted By: John Connor
Date Posted: 25.Nov.2013 at 22:47
You posted to the Civil 3D forum so are you really using that program or not?  Your profile says Using: self.  Are you self-using?  That could denote any number of weird things.

And I thought you were going to provide us with a drawing file.  Where is it?


-------------
"Humans have a strength that cannot be measured. This is John Connor. If you are reading this, you are the resistance."

<<AutoCAD 2015>>


Print Page | Close Window