Byl uveden Service Pack 1 pro AutoCAD Civil 3D 2014. Ke stažení na:http://www.cadstudio.cz/download?ccat=6&file=2014 Viz též:http://www.cadforum.cz/cadforum/prehled-doplnkovych-patchu-pro-rodinu-autocadu-2014-tip9452ahttp://www.cadforum.cz/cadforum/produkty.asp?prod=AutoCAD+Civil+3D Přehled hlavních oprav (je jich docela dost): The following issues have been resolved in Autodesk AutoCAD Civil 3D 2014
Service Pack 1:
Alignments

Using the Create Best Fit Alignment command no longer causes the application
to close unexpectedly.
Corridor Design

Importing a subassembly that exists in a folder with a long path no longer
causes the application to close unexpectedly.
Setting an override from True to False for a parameter in the Corridor
Section Parameter Editor when the Corridor Section Editor viewports are
configured to display multiple viewports no longer causes the application to
close unexpectedly.
Surface profiles that are generated from a data-referenced corridor surface
and a data-referenced alignment (using the data shortcuts feature) are now
dynamic.
The application no longer closes unexpectedly when you are working in a
drawing with the Corridor Section Editor open and you then open (or create) and
then close another drawing.
Importing a subassembly when a Tool Palette is not displayed no longer
causes the application to close unexpectedly. To import a subassembly to a Tool
Palette, the Tool Palette must first be open. If no Tool Palette is open, the
option to import the subassembly to a Tool Palette is not available for
selection.
Attaching another subassembly to a LinktoMarkpoint subassembly that exists
in an offset assembly no longer causes the application to close unexpectedly.
3D polylines that exist in the drawing no longer appear by default in the
Corridor Section Editor.
Importing a subassembly to a Tool Palette and then re-importing the same
subassembly no longer causes the application to close unexpectedly.
When you create a subassembly from a polyline, the behavior of the Link
Creation setting now works as expected.
Corridor feature lines that are drawn at fixed offset distances now appear
as expected in the drawing.
Section Views

The positions of volume tables are now maintained when a drawing containing
them is saved, closed, and reopened.
General/Other

Stability when using a menu with a drop down list has been improved.
Using Ctrl+Tab to switch between open drawings while the Layer Manager is
open no longer causes the application to display an error message and close
unexpectedly.
Opening a drawing that was created in AutoCAD Civil 3D 2013 (or in an
earlier version) that contains data references no longer causes the application
to close unexpectedly.
Selecting points within the Point Editor and then clicking in the Style
column no longer causes the application to close unexpectedly.
Importing profile view band styles now works as expected.
Creating feature lines from a large number of polylines no longer causes the
application to close unexpectedly.
Grip editing a feature line after using the feature line Fillet command and
then using the UNDO command no longer causes the application to close
unexpectedly.
Using the ExportToAutoCAD command on a drawing that has an attached xref no
longer causes the application to close unexpectedly.
Using the APPLOAD command to load AeccCustomDraw.dbx, AeccCustomEvent.dbx
and AeccCustomUI.dbx now works as expected.
The geographic location is now correct when the units in the drawing are
different from the units in the Geographic Location dialog box.
To use the ImportCAiCEKCM command, the Microsoft® Access Database Engine
2010 Redistributable must be installed first. You can download the Microsoft
Access Database Engine 2010 Redistributable from http://www.microsoft.com/en-us/download/details.aspx?id=13255.

Starting the application after uninstalling AutoCAD® Map 3D 2010 no longer
causes the application to close unexpectedly.
Labels

Values are now rounded correctly in profile station labels that use station
index format with rounding.
Autodesk AutoCAD Map 3D Integration

Live Map Data tiles are now loaded correctly when opening the application.
The MAPIMPORT command now imports SHP and SDF files as expected.
Object Enabler

Using the eTransmit command in Autodesk® AutoCAD® or Autodesk® AutoCAD LT®
when the Civil Object Enabler is installed no longer causes the program to close
unexpectedly.
Drawings that contain alignments, profiles, and pressure networks that are
created in the current version of the program and then saved in an earlier
version of the program now open as expected in AutoCAD (or other object-enabled
program) when the Civil Object Enabler is installed.
Parcels

Running the Parcel Map Check report no longer causes the application to
close unexpectedly.
Using the Delete PI command on a parcel segment point of intersection no
longer causes the application to close unexpectedly.
Editing a parcel segment by holding the Ctrl key down and moving a grip no
longer causes the application to close unexpectedly.
Pipes

Deleting a pipe or structure when the Toolspace window is hidden no longer
causes the application to close unexpectedly.
On the Microsoft® Windows
8® operating system, if you display a rollover
tooltip for a pipe network and then exit the application, the application no
longer closes unexpectedly.
Changing a pipe network part in the source file of a data shortcut now
updates the part style in the referenced pipe network as expected.
Inserting a custom part into a pipe network now works as expected.
Using the Batch Import command to import pipe network parts into the Content
Catalog Editor now works as expected.
The accuracy of the Part Builder Data Structure Table has been improved.
The structure style block rotation is now aligned with the 3D solid.

Pressure Networks

When using the Follow Surface command, the application no longer closes
unexpectedly if the reference surface for the pressure network has a gap in it.

Profiles

Using the Profile Layout Tools toolbar no longer causes the application to
close unexpectedly.
Profile Views

Pressure network parts can now be re-drawn in profile view after drawing
them in profile view and deleting them.
Points

Adding points to a table, using the UNDO command, and then selecting the
table no longer causes the application to become unresponsive.
The Convert Land Desktop Points command now uses the Preserve Original Point
Layer setting.
Point Clouds

The Window selection option in the Add Points to Surface command now works
as expected.
Creating a point cloud or a surface from an ESRI ASC file now works as
expected.
Attaching an RCP or RCS point cloud to the drawing and then adding AutoCAD
Civil 3D properties to the point cloud now works as expected.
Project Manager

Extra .map files are no longer created when importing a Vault project.

Quantity Takeoff

Adding, removing, and then re-adding a point file to a surface definition no
longer causes the application to close unexpectedly.
Subassembly Composer

Void areas in corridor subassemblies are now displayed as expected in cross
section views.
Surfaces

Surface analysis colors defined from color books are no longer converted to
index colors for rendering in model space.
Surface analysis data is now maintained after the surface is rebuilt.
Surface analysis values that are outside of the defined ranges no longer
appear as white in the drawing.
Switching to a different layout when the Level of Detail mode is active no
longer causes the application to close unexpectedly.
If a DEM file that is added as surface data does not contain coordinate
system information, the coordinate system that you assign when adding the DEM
file is now used for the surface.
DEM files inserted as raster images are now positioned correctly.
Polylines created with the Water Drop command now use the PLINEGEN system
variable.
Using the Paste Surface command no longer causes the application to close
unexpectedly.
Survey

Exploding a large number of survey figures, and then copying and pasting the
entities into another drawing, no longer causes the application to close
unexpectedly.
The Logging Enabled setting (under Change Reporting) is now included when
the survey database settings are saved to an external file.
Importing a LandXML file with an invalid data format no longer causes the
application to close unexpectedly.
Creating a new survey database after importing survey database settings from
a file no longer causes the application to close unexpectedly.
Traverses are now inserted into the drawing with the expected rotation
angle.
Importing a field book file when the drawing coordinate system and survey
database coordinate system are different no longer causes the application to
close unexpectedly.
Importing a field book without having a network selected first will no
longer cause the application to close unexpectedly.
Coordinate values are now created correctly when importing a Face 1 and Face
2 reciprocal observation field book file.